Getting Started with Shadow PC Gaming

Requirements and FAQs

Introduction with Shadow PC Gaming

General

Technical Assistance - General

Resolution & Image Quality

Software Setup

Connection & Network

Performance Issues

Storage

Known Issues for Shadow

Mice, Keyboards, and Other Peripherals

Error Messages

Sound & Microphones

Authentication

Technical Assistance - Apps, Ghost, and Box

Getting Started with Shadow PC Enterprise

Getting Started with Shadow Drive

Account Management

Contact Support

R:108, R:109, and R:110 - An issue happened when connecting to your Shadow

Updated 

R:108, R:109, and R:110 occur if your apps, settings, or network are conflicting with your device's connection to our servers. If closing and reopening the Shadow application does not resolve the error, this guide will help you identify and solve the problem.

Check Shadow's status

Visit our status page to see if your server is under maintenance. We recommend checking the server nearest to your location for reference.

If there are no updates related to the error, continue to connect to a different network.

Connect to a different network

Connect your device to a different network or use a different device. To do this, switch to another WiFi or 4G network, or use a smartphone or other device available to you. Try starting Shadow after you've applied these changes.

Troubleshoot your internet connection

Complete the tasks listed below until the issue is resolved. If you are not able to complete a task, proceed to the next item.

  1. Disable your Antivirus, Firewall, VPN, or proxy.

  2. Use an Ethernet cable to connect your computer to your router/modem.

  3. Restart your router/modem:

    1. Disconnect any Ethernet cables from the modem, then turn off the modem.

    2. After 60 seconds, turn on the modem and monitor the lights on the front. Fewer lights generally indicate a problem with the modem.

    3. Once your internet connection is available, connect your devices.

Note: If you are using a mobile device, we suggest you:

  1. Access your network settings.

  2. Disable auto 4G/auto 5G.

  3. Enable 5G only instead (or 4G only if you can’t have 5G).

Letting your mobile device cycle between 3G/4G/5G automatically can result in inconsistent connection and can cause the R-108 error on your Shadow PC launcher.

For other troubleshooting tips, see how to troubleshoot your internet connection.

If issues persist, contact your Internet Service Provider (ISP) for any potential issues affecting their services and/or your location.

Still have questions after reading this article?

Feel free to check out our other articles.

You can also contact Shadow support via our form.