Skip to main content
 

Getting Started with Shadow PC Gaming

Requirements and FAQs

Introduction with Shadow PC Gaming

General

Technical Assistance - General

Resolution & Image Quality

Software Setup

Connection & Network

Performance Issues

Storage

Known Issues for Shadow

Mice, Keyboards, and Other Peripherals

Error Messages

Sound & Microphones

Authentication

Technical Assistance - Apps, Ghost, and Box

Getting Started with Shadow PC Enterprise

Getting Started with Shadow Drive

Account Management

Contact Support

Set up an Xbox controller on Shadow PC

Updated 

3 months ago

Shadow PC supports Xbox controllers using a wired USB or wireless Bluetooth connection. Some controllers may require additional configuration to help Shadow PC recognize your controller.

Connect your controller to Shadow PC

Shadow PC can detect Xbox One Wireless and Xbox 360 controllers when plugged into your local device using a wired USB cable.

  1. Open the Shadow PC launcher and click Start.

  2. Use the USB cable to connect the Xbox controller to the blue USB 3.0 port on your local device.

    Note: If your device doesn't have a USB 3.0 port, you may continue to plug the device in as you normally would, but some features may not work.

  3. When your controller is connected, a notification will appear at the top of the screen.

  4. If a notification doesn't appear, restart Shadow PC while the controller is still plugged in.

Shadow PC can detect Xbox One Wireless controllers.

  1. Pair the Xbox One Wireless controller with your local device via Bluetooth.

  2. Open the Shadow PC launcher and click Start.

  3. When your controller is connected, a notification will appear at the top of the screen.

  4. If a notification doesn't appear, restart Shadow PC while the controller is still paired.

Note: You may also use a wireless adapter if the manufacturer supports this option. Plug the USB adapter into your local device, then pair the controller to the adapter via Bluetooth.

Related questions

For help pairing a controller with your local Bluetooth-capable device, choose your device's operating system:

  1. Confirm your local device has detected your controller. Shadow PC can only detect controllers that are also detected by your local operating system.

  2. Update your Xbox Wireless controller.

  3. Try forwarding your controller to Shadow PC from the Quick Menu.

  4. Troubleshoot your connection. Your Internet connection may not meet the minimum requirements.

  5. Make sure your local device meets Shadow PC's recommended requirements.

Note: If your local device does not meet the recommended requirements, it may not be capable of supporting all of Shadow PC's features and functionality, even if it meets the minimum requirements.

Shadow PC supports most Xbox controller features, but they may not work if:

  • USB drivers are outdated

  • The Bluetooth software is too old

  • Your system is unable to emulate the controller

If some features are not working, you can try forwarding your controller to Shadow PC from the Quick Menu. Remove your Xbox controller from the forwarded list if it stops working.

Yes, but third-party Xbox controllers may behave unpredictably on Shadow PC. You may need additional software from the manufacturer to use the controller or its features.

​

Still have questions after reading this article?

Check out our other articles or contact Shadow Support.

Was this article helpful?