Shadow Ghost Technical Specifications
Updated
Developer Note: Both the Shadow Box and the Shadow Ghost have reached their EOL (End-of-Life) as of January 2024. You may continue to use these devices, but ongoing hardware and software support is no longer guaranteed. Read more on our blog.
The Shadow Ghost is a small streaming device that connects you to your Shadow without needing a computer or smartphone. You can use your Shadow with just a mouse, keyboard, and a monitor or TV. Its quiet, slim design makes it easy to install with your current setup.
To see what makes the Shadow Ghost great, see the technical specifications below:
Power
The Shadow Ghost is fanless and has a red LED light at the bottom, making it easy on power and consuming around 7 Watts per hour.
Internet
You can connect to the internet using an RJ45 Ethernet cable, up to 1Gb/s or Wi-Fi. It's compatible with Dual-Band routers, making it possible to use both 2.4GHz and 5GHz frequencies, and supports the following 802.11 protocols:
802.11a
802.11b/g/n
802.11ac
Choose Ethernet or 5GHz Wi-Fi for the best experience.
Display
The Shadow Ghost can stream to your monitor or TV in 1080p HD at 144Hz, up to 4K UHD at 60Hz , using the HDMI 2.0 port .
Peripheral Support
To connect your peripherals, such as your mouse, keyboard, or controller, use the USB 2.0 and 3.0 ports. Learn how to set up a USB device.
If you want to connect a wireless device, the Shadow Ghost has a Wi-Fi + Bluetooth AP6356S module . There's also a port for 3.5mm auxiliary headphones and microphones. See how to pair a Bluetooth device.
System Hardware
The Shadow Ghost ships with a system on chip circuit (SoC) RK3399 coupled with 2GB of DDR3 RAM and 8GB of operating system storage.Tips for Using the Shadow Ghost
For more information about the Shadow Ghost, see these articles:
Still have questions after reading this article?
Check out our other articles or contact Shadow Support.